Below is only a summary of product data. Please download the product datasheet for complete details.
| Generic Type | Polyamidoamine Epoxy |
|---|---|
| Common Usage | Versatile epoxy coating for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized or distilled water. |
| Colors | 1255 Beige, 15BL Tank White. Note: Epoxies chalk with extended exposure to sunlight. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause yellowing to occur. |
| Primers | Self-priming, 1, 91-H2O, 94-H2O, N140, N140F, L140F |
| Topcoats | Interior: Series 22, L140F Exterior: Series 27, 66, L69, L69F, N69, N69F, 73, L140F, N140, N140F, 161, 180, 1028, 1029, 1074, 1074U, 1075, 1075U, 1080, 1081. Refer to COLORS on applicable topcoat data sheets for additional information. Note: The following recoat times apply for Series L140: Immersion Service—Surface must be scarified after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. Contact your Tnemec representative for specific recommendations. |
| Volume Solids | 65.0 ± 2.0% (mixed) † |
| Recommended DFT | 2.0 to 10.0 mils (50 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. |
| Volatile Organic Compounds | Unthinned: 0.82 lbs/gallon (98 grams/litre) Thinned 5% (No. 49 Thinner): 0.82 lbs/gallon (98 grams/litre) † |
| HAPS | Unthinned: 0 lbs/gal solids Thinned 5% (No. 49 Thinner): 0 lbs/gal solids |
| Theoretical Coverage | 1,043 mil sq ft/gal (25.6 m²/L at 25 microns). See APPLICATION for coverage rates. † |
| Number Of Components | Two: Part A and Part B |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| Product / Generic Type | Volume Solids | Rec. DFT | V.O.C. | # of Components |
|---|---|---|---|---|
| This ProductPolyamidoamine Epoxy | 65.0 ± 2.0% (mixed) † | 2.0 to 10.0 mils (50 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. | Unthinned: 0.82 lbs/gallon (98 grams/litre) Thinned 5% (No. 49 Thinner): 0.82 lbs/gallon (98 grams/litre) † | Two: Part A and Part B |
 Polyamidoamine Epoxy |