Series 750 | UVX

Generic Type Polyfunctional Hybrid Urethane
Common Usage An advanced technology polyurethane finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention for long-term aesthetics on a wide range of exterior structures. Durable film stands up to exterior weathering. Very good brush, roll and spray application characteristics. NOT FOR IMMERSION SERVICE.
Colors Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably different.
Finish Semi-gloss
Primers Steel: Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 73, 90G-1K97, 90-97, H90-97, 91-H2O, 94-H2O, 135, L140, L140F, N140, N140F, V140, V140F, 161, 394, 1075
Concrete: Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 161
Note: Series 66, L69, N69, V69, 135, L140, N140, or V140 exposed more than 21 days; Series 27, 161, L69F, N69F, V69F, L140F, N140F, or V140F exposed more than 14 days; and Series 27WB exposed more than 90 days must first be scarified or reprimed with themselves prior to topcoating. Series 73 or 1075 exposed more than 90 days must first be scarified or reprimed with epoxy prior to topcoating. Brush blasting with fine abrasive is the preferred method of scarification.
Topcoats Series 700, 701, 740, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1077, 1078
Note: When topcoating Series 750 with itself, or any of the above listed topcoats, the maximum recoat time is 45 days.
Volume Solids 72.0 ± 2.0% (mixed) †
Recommended DFT 2.5 to 5.0 mils (65 to 125 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
TemperatureTo TouchTo HandleTo Recoat
75°F (24°C)2 hours6-8 hours8 hours
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster time-to-moisture resistance and low-temperature applications, add No. 44-712 Urethane Accelerator; see separate product data sheet.
Volatile Organic Compounds Unthinned: 0.82 lbs/gallon (99 grams/litre)
Thinned 10% (No. 68 Thinner): 0.82 lbs/gallon (99 grams/litre)
Thinned 10% (No. 49 Thinner): 0.82 lbs/gallon (99 grams/litre) †
HAPS Unthinned: 0 lbs/gal solids
Thinned 10% (No. 68 Thinner): 0 lbs/gal solids
Thinned 10% (No. 49 Thinner): 0 lbs/gal solids
Theoretical Coverage 1155 mil sq ft/gal (28.3 m²/L at 25 microns) †
Number of Components Two: Part A and Part B

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductPolyfunctional Hybrid Urethane
Volume SolidsRec. DFTV.O.C.# of Components
72.0 ± 2.0% (mixed) †2.5 to 5.0 mils (65 to 125 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.Unthinned: 0.82 lbs/gallon (99 grams/litre)
Thinned 10% (No. 68 Thinner): 0.82 lbs/gallon (99 grams/litre)
Thinned 10% (No. 49 Thinner): 0.82 lbs/gallon (99 grams/litre) †		Two: Part A and Part B
Series 73 | Endura-Shield Aliphatic Acrylic Polyurethane
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
58.0 ± 2.0% (mixed) †2.0 to 5.0 mils (50 to 125 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
UnthinnedThinned 10% (Max) (No. 39 Thinner)Thinned 10% (Max) (No. 42 Thinner)Thinned 10% (Max) (No. 56 Thinner)Thinned 10% (Max) (No. 63 Thinner)
2.70 lbs/gallon
(325 grams/litre)		3.06 lbs/gallon
(367 grams/litre)		3.11 lbs/gallon
(372 grams/litre)		2.77 lbs/gallon
(331 grams/litre)		3.08 lbs/gallon
(369 grams/litre)

†		Two: Part A and Part B
Series 1075 (or 1075U) | Endura-Shield II Aliphatic Acrylic Polyurethane
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
71 ± 2.0% (mixed) †2.0 to 5.0 mils (50 to 125 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.EPA Method 24 †
Unthinned Maximum 15%
(No. 39 Thin.) 		Max 15%
(No.42 Thin.) 		Max 15%
(No. 48 Thin.) 		Max 15%
(No. 56 Thin.) 		Max 15%
(No. 63 Thin.)
1075 1.84 lbs/gal (220 g/l) 2.42 lbs/gal (290 g/l) 2.48 lbs/gal (297 g/l) 2.55 lbs/gal (305 g/l) 1.94 lbs/gal (232 g/l) 2.54 lbs/gal (305 g/l)
1075U 2.16 lbs/gal (258 g/l) 2.70 lbs/gal (323 g/l) 2.75 lbs/gal (330 g/l) 2.83 lbs/gal (339 g/l) 2.27 lbs/gal (271 g/l)
Two: Part A and Part B
Series 1081 | Endura-Shield Waterborne Acrylic Polyurethane
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
61.0 ± 2.0% (mixed) †2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating aesthetics and performance. Number of coats and thickness requirements will vary with substrate, application method and exposure. Excessive film thicknesses will cause microbubbling. Contact your Tnemec representative.Unthinned: 0.72 lbs/gallon (87 grams/litre)
Thinned 5% (No. 66 Thinner): 1.22 lbs/gallon (147 grams/litre) †		Two: Part A and Part B

Email this product

Support Documents