Series 617 | Conformal Stain WB

Generic Type 100% Acrylic Polymer
Common Usage Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain WB exhibits excellent color stability, and is designed not to peel or flake when applied to a properly prepared substrate. Conformal Stain WB provides color uniformity by correcting color imperfections often found in integrally colored concrete masonry, natural stone, tilt-up and precast panels. Repels water when used on dense substrates. Conformal WB is mildew resistant and contains agents that inhibit the growth of mildew on the surface of the stain.
Colors Conformal Stain WB is available in 17 standard colors. Custom color matching is available. Please contact your Chemprobe/Tnemec representative.
Volume Solids 28.99 ± 2.0% †
Curing Time
Temperature To Touch To Recoat Light Use Light Traffic Bearing
75°F (24°C) 1 hour 2-4 hours 24 hours 72 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds 0.46 lbs/gallon (55 grams/litre) †

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This Product100% Acrylic Polymer
Volume SolidsRec. DFTV.O.C.# of Components
28.99 ± 2.0% † 0.46 lbs/gallon (55 grams/litre) † 
Series 607 | Conformal Stain Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
19% † 6.1 lbs/gallon (729 grams/litre) † 

Email this product

Series 617 Conformal Stain WB was used to restore the exterior of the Pankow Museum in San Francisco, CA, which required custom color matching.