Series 30 | Spra-Saf EN

Generic Type Hydrophobic Acrylic Polymer
Common Usage An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated to resist mildew growth on the paint film. Provides good gloss and color retention on structural steel, tanks, towers, pipes and similar structures. May also be used on a wide range of other substrates and many aged coatings, interior or exterior (test patch is recommended per Technical Bulletin 98-10). Application methods include “dry-fall” under certain conditions (see Application).
Note: Spra-Saf EN’s “dry-fall” characteristics help reduce the potential for overspray problems on buildings and surrounding property.
Colors Refer to Tnemec Color Guide.
Finish Satin
Primers Steel: Self-priming or Series 10, 27, 37H, 66, L69, N69, N69F, 90E-92, 115, 135, L140, L140F, N140, 151, 161.
Note: Allow Series 10 and 37H to cure one week before topcoating.
Topcoats Series 30, 1028, 1029
Volume Solids 38.0 ± 2.0% †
Recommended DFT 2.0 to 4.0 mils (50 to 100 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 1 hour 3 hours 4 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 1.60 lbs/gallon (192 grams/litre)
Thinned 5%: 1.60 lbs/gallon (192 grams/litre) †
HAPS Unthinned: 1.03 lbs/gal solids
Thinned 5%: 1.03 lbs/gal solids
Theoretical Coverage 610 mil sq ft/gal (15.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One

Email this product

Spra-Saf on a water storage tank in Lumberton, NC

Support Documents

View all support documents