Below is only a summary of product data. Please download the product datasheet for complete details.
| Generic Type | Aliphatic Polyester Polyurethane | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Common Usage | Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes. | ||||||||
| Colors | Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Certain colors may require multiple coats depending on the method of application and finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably different. | ||||||||
| Finish | Semi-Gloss | ||||||||
| Primers | Steel: Series 20, 27, 66, L69, L69F, N69, N69F, 90-97, 90-1K97, 104, L140, L140F, N140, N140F, 161, 205. Concrete: Series 66, L69, L69F, N69, N69F, 104, 161, 201, 205, 237, 238, 280, 281, 287. |
||||||||
| Intermediate | Series 20, 27, 66, L69, L69F, N69, N69F, 104, L140, L140F, N140, N140F, 161, 205, 210, 237, 238, 270, 273, 275, 280, 281, 282, 287. Note: Before topcoating with Series 290, any Tnemec epoxy exterior exposed for more than three weeks must be scarified or reprimed with itself. Mechanically abrading or power-sanding is the preferred method of scarification. The maximum recoat time for Series 210, 237, 238, 280, 281 and 282 is 24 hours. Refer to those product data sheets. Inorganic zinc-rich primers require an epoxy intermediate coat. |
||||||||
| Volume Solids | 67 ± 2.0% (mixed) † | ||||||||
| Recommended DFT | 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on substrate (surface) and other variables. Contact your Tnemec representative. | ||||||||
| Curing Time |
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: If more than 48 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. |
||||||||
| Volatile Organic Compounds | Unthinned: 2.41 lbs/gallon (288 grams/litre) Thinned 10% (Max) (No. 39 Thinner): 2.76 lbs/gallon (330 grams/litre Thinned 10% (Max) (No. 42 Thinner): 2.80 lbs/gallon (335 grams/litre † |
||||||||
| HAPS | Unthinned: 0.16 lbs/gal solids Thinned 10% (Max) (No. 39 Thinner): 0.16 lbs/gal solids Thinned 10% (Max) (No. 42 Thinner): 0.16 lbs/gal solids |
||||||||
| Theoretical Coverage | 1,075 mil sq ft/gal (26.4 m²/L at 25 microns). See APPLICATION for coverage rates. † | ||||||||
| Number Of Components | Two: Part A and Part B (2.5 Parts A to 1 Part B by volume) |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| Product / Generic Type | Volume Solids | Rec. DFT | V.O.C. | # of Components |
|---|---|---|---|---|
| This ProductAliphatic Polyester Polyurethane | 67 ± 2.0% (mixed) † | 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on substrate (surface) and other variables. Contact your Tnemec representative. | Unthinned: 2.41 lbs/gallon (288 grams/litre) Thinned 10% (Max) (No. 39 Thinner): 2.76 lbs/gallon (330 grams/litre Thinned 10% (Max) (No. 42 Thinner): 2.80 lbs/gallon (335 grams/litre † | Two: Part A and Part B (2.5 Parts A to 1 Part B by volume) |
 Ceramic-Modified Waterborne Aliphatic Polyurethane |
57 ± 2.0% (mixed) † | 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Application of coating below minimum or above maximum recommended dry film thickness may adversely affect coating aesthetics and performance. Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. | Unthinned: 0.74 lbs/gallon (89 grams/litre) Thinned 15%: 0.74 lbs/gallon (89 grams/litre) † | Two: Part A and Part B |