Series 222 | Deco-Tread

Generic Type Colored Quartz-Filled Modified Polyamine Epoxy
Common Usage A decorative broadcast or slurry broadcast laminated floor-topping system installed at 1/8” minimum thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.
Colors Available in 12 standard colors. Refer to StrataShield Decorative Quartz Color card. Custom colors also available. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Decorative quartz—multi-colored appearance. The finished appearance will depend on the type, film thickness and number of the clear finish coats selected.
Surfacer/Filler/Patcher Series 63-1500, 206, 218, 219. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 201
Topcoats Series 284, 285, 295. Note: If Series 285 or 295 is selected for the finish coat, an intermediate coat of Series 284 is required. Refer to the StrataShield Installation and Application guide for floors.
Volume Solids 100% (mixed)
Recommended DFT Minimum of 1/8”. Requires two broadcast applications at 1/16” each or applied as a slurry broadcast.
Curing Time
Temperature Between Broadcasts/Topcoats Place in Service
75°F (24°C) 12 to 24 hours 24 hours
Volatile Organic Compounds Unthinned: 0.15 lbs/gallon (18 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductColored Quartz-Filled Modified Polyamine Epoxy
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed)Minimum of 1/8”. Requires two broadcast applications at 1/16” each or applied as a slurry broadcast.Unthinned: 0.15 lbs/gallon (18 grams/litre)Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
Series 223 | Deco-Trowel Colored Quartz-Filled Modified Polyamine Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed)Suggested 1/4”Unthinned: 0.15 lbs/gallon (18 grams/litre)Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored quartz: Part C
The Part C colored quartz (ChromaQuartz) is available from Tnemec or can be purchased from a different supplier.
Series 224 | Deco-Fleck Decorative Flake-Filled Modified Polyamine Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed)From 20 mils DFT to 1/16” depending on broadcast method.Unthinned: 0.18 lbs/gallon (22 grams/litre)Three—Liquids: Part A & Part B (2 Parts A to 1 Part B by volume). Colored Flake: Part C
The Part C colored flake is available from Tnemec or can be purchased from a different supplier.

Email this product

Series 222 Decotread (Color: Q205)

Support Documents

View all support documents