Series 135 | Chembuild

Generic Type Modified Polyamidoamine Epoxy
Common Usage High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.
Colors DC74 Off-White, 1243 Metallic Aluminum and more: refer to Tnemec Color Guide.
Note: Epoxies chalk with extended exposure to sunlight. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause yellowing to occur.
Finish Semi-gloss
Primers Steel: Self-priming
Galvanized Steel and Non-Ferrous Metal: Self-priming
Topcoats Series 6, 30, 35, 66, L69, L69F, N69, N69F, V69, V69F, 73, 84, 104, 115, 161, 1028, 1029, 1070, 1071, 1072, 1074, 1074U, 1075, 1075U. Note: When topcoating with Endura-Shield polyurethane finish, exterior exposed Series 135 has the following maximum time to recoat: Series 73, 1074/1074U or 1075/1075U, 60 days. Series 1070, 1071 or 1072, 14 days. If these times are exceeded, an epoxy intermediate coat or scarification is required before topcoating. Refer to appropriate topcoat data sheet for additional information.
Volume Solids 84.0 ± 2.0% (mixed) †
Recommended DFT Conventional Build: 4.0 to 6.0 mils (100 to 150 microns) per coat.
Hi-Build: 7.0 to 9.0 mils (180 to 230 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 6 hours at 5.0 mils DFT
(125 microns) 		18 hours 24 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds EPA Method 24 Unthinned: 0.72 lbs/gallon (86 grams/litre)
Thinned 15% (No. 19 Thinner): 1.91 lbs/gallon (229 grams/litre)
Thinned 15% (No. 18 Thinner): 2.05 lbs/gallon (246 grams/litre)
Thinned 15% (No. 62 Thinner): 0.72 lbs/gallon (86 grams/litre) †
HAPS Unthinned: 1.29 lbs/gal solids
Thinned 15% (No. 19 Thinner): 2.54 lbs/gal solids
Thinned 15% (No. 18 Thinner): 1.29 lbs/gal solids
Theoretical Coverage 1,347 mil sq ft/gal (33.1 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamidoamine Epoxy
Volume SolidsRec. DFTV.O.C.# of Components
84.0 ± 2.0% (mixed) †Conventional Build: 4.0 to 6.0 mils (100 to 150 microns) per coat.
Hi-Build: 7.0 to 9.0 mils (180 to 230 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.		EPA Method 24 Unthinned: 0.72 lbs/gallon (86 grams/litre)
Thinned 15% (No. 19 Thinner): 1.91 lbs/gallon (229 grams/litre)
Thinned 15% (No. 18 Thinner): 2.05 lbs/gallon (246 grams/litre)
Thinned 15% (No. 62 Thinner): 0.72 lbs/gallon (86 grams/litre) †		Two: Part A and Part B
Series 27 | F.C. Typoxy Polyamide Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
58.0 ± 2.0% (mixed) †2.0 to 6.0 mils (50 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.Unthinned: 2.36 lbs/gallon (282 grams/litre)
Thinned 10% (No. 60 Thinner): 2.83 lbs/gallon (339 grams/litre)
Thinned 10% (No. 4 Thinner): 2.83 lbs/gallon (339 grams/litre) †		Two: Part A and Part B

Email this product

Series 135 Chembuild applied to the seat frames at Bryant-Denny Stadium, University of Alabama.

Support Documents

View all support documents