Below is only a summary of product data. Please download the product datasheet for complete details.
| Generic Type | Waterborne Acrylic Epoxy | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Common Usage | High performance semi-gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance. | ||||||||
| Colors | Refer to Tnemec Color Guide. | ||||||||
| Finish | Series 113: Satin Series 114: Gloss | ||||||||
| Primers | Steel: Series 1, 10, 27, 37H, 66, N69, N69F, 90E-92, 90-97, H90-97, 115, 530. Note: Series 10 and 37H are not recommended for frequently wet conditions. Allow Series 10 to cure one week and 37H to cure 30 days before topcoating. Note: When topcoating Series 1 with 113, maximum recoat time is three days. Galvanized Steel and Non-Ferrous Metal: Series 66, N69, N69F, 115 Dense Concrete: Self-priming, Series 130, 63-1500, 218 CMU: Series 130, 54-562, 54-660, 216, 218 Drywall: Series 151 Wood: Dry interior environments only, self-priming, Series 10-99W, 151-1051 |
||||||||
| Volume Solids | Series 113: 44.0 ± 2.0% (mixed) Series 114: 42.0 ± 2.0% (mixed) † | ||||||||
| Recommended DFT | 4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. | ||||||||
| Curing Time |
Curing time varies with surface temperature, air movement, humidity and film thickness. |
||||||||
| Volatile Organic Compounds | Unthinned Series 113: 1.90 lbs/gallon (228 grams/litre) Series 114: 2.04 lbs/gallon (244 grams/litre) Thinned 5% (No. 59 Thinner) Series 113: 2.03 lbs/gallon (243 grams/litre) Series 114: 2.16 lbs/gallon (258 grams/litre) † |
||||||||
| HAPS | Unthinned Series 113: 2.59 lbs/gal solids Series 114: 2.83 lbs/gal solids Thinned 5% (No. 59 Thinner) Series 113: 2.82 lbs/gal solids Series 114: 3.06 lbs/gal solids |
||||||||
| Theoretical Coverage | Series 113: 706 mil sq ft/gal (17.3 m²/L at 25 microns). See APPLICATION for coverage rates. Series 114: 674 mil sq ft/gal (16.5 m²/L at 25 microns). See APPLICATION for coverage rates. † |
||||||||
| Number Of Components | Two: One Part A (4.5 gal) and One Part B (1/2 gal) |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| Product / Generic Type | Volume Solids | Rec. DFT | V.O.C. | # of Components |
|---|---|---|---|---|
| This ProductWaterborne Acrylic Epoxy | Series 113: 44.0 ± 2.0% (mixed) Series 114: 42.0 ± 2.0% (mixed) † | 4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. | Unthinned Series 113: 1.90 lbs/gallon (228 grams/litre) Series 114: 2.04 lbs/gallon (244 grams/litre) Thinned 5% (No. 59 Thinner) Series 113: 2.03 lbs/gallon (243 grams/litre) Series 114: 2.16 lbs/gallon (258 grams/litre) † | Two: One Part A (4.5 gal) and One Part B (1/2 gal) |
 Waterborne Acrylic Epoxy |
Series 113: 44.0 ± 2.0% (mixed) Series 114: 42.0 ± 2.0% (mixed) | 4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness re quirements will vary with substrate, application method and exposure. Contact your Tnemec representative. | Two: One Part A (4.5 gal) and One Part B (1/2 gal) |
Series 113 H.B. Tneme-Tufcoat used at the Aramco Hanger in Houston, TX.