Below is only a summary of product data. Please download the product datasheet for complete details.
| Generic Type | HDP Acrylic Polymer | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Usage | Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Product exhibits direct-to-metal capabilities for dry interior environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property. | ||||||||||
| Colors | Refer to Tnemec Color Guide. Note: Certain colors may require multiple coats depending on method of application and finish coat color. When feasible, the preceding coat should be in the same color family (blue, gray, etc.), but noticeably different. | ||||||||||
| Finish | Low semi-gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material. | ||||||||||
| Primers | Wood: Series 10-99W or 151-1051 Steel: Series 1, 10, 18, 22, 30, 37H, 66, N69, N69F, L69, L69F, 90-97, 90-1K97, 91-H2O, 94-H2O, 113, 115, 135, 141, 161, 287, 394. Note: Allow Series 10 and 37H to cure three days before topcoating. Additionally, Series 1, 90-97, 90-1K97, 91-H2O, 94-H2O and 394 must be exterior exposed for three days prior to topcoating. Aluminum & Galvanized: Series 66, N69, N69F, L69, L69F, 115, 135 Concrete: Self-priming or Series 66, 151, 287 Drywall: 51-792, 151-1051 |
||||||||||
| Topcoats | Series 1028, 1080, 1081 | ||||||||||
| Volume Solids | 40.0 ± 2.0% † | ||||||||||
| Recommended DFT | 2.0 to 3.0 mils (50 to 75 microns) per coat. | ||||||||||
| Curing Time |
Curing time varies with surface temperature, air movement, humidity and film thickness. |
||||||||||
| Volatile Organic Compounds | Unthinned: 0.79 lbs/gallon (94 grams/litre) Thinned 5%: 0.79 lbs/gallon (94 grams/litre) † |
||||||||||
| HAPS | Unthinned: 0.31 lbs/gal solids Thinned 5%: 0.31 lbs/gal solids |
||||||||||
| Theoretical Coverage | 643 mil sq ft/gal (15.8 m²/L at 25 microns). See APPLICATION for coverage rates. † | ||||||||||
| Number Of Components | One |
The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.
| Product / Generic Type | Volume Solids | Rec. DFT | V.O.C. | # of Components |
|---|---|---|---|---|
| This ProductHDP Acrylic Polymer | 40.0 ± 2.0% † | 2.0 to 3.0 mils (50 to 75 microns) per coat. | Unthinned: 0.79 lbs/gallon (94 grams/litre) Thinned 5%: 0.79 lbs/gallon (94 grams/litre) † | One |
 Acrylic |
||||
 Hydrophobic Acrylic Polymer |
38.0 ± 2.0% † | 2.0 to 4.0 mils (50 to 100 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative. | Unthinned: 1.60 lbs/gallon (192 grams/litre) Thinned 5%: 1.60 lbs/gallon (192 grams/litre) † | One |
 HDP Acrylic Polymer |
39.5 ± 2.0% † | 2.0 to 3.0 mils (50 to 75 microns) per coat. | Unthinned: 0.79 lbs/gallon (94 grams/litre) Thinned 5%: 0.79 lbs/gallon (94 grams/litre) † | One |
Series 1029 Enduratone creates a decorative band around the Kaverton Warehouse.