A single component, moisture-cured resin, containing a proprietary blend of micaceous iron oxide and zinc to function as a primer which is field and shop friendly. May be used in OEM manufacturing,..

Industrial grade, matte finish, water-based coating with excellent color retention. Good overall protection for most interior/exterior surfaces in mild to moderately severe exposures. Application..

Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel.

This product has been discontinued. Please refer to Series 115 Uni-Bond DF for a suitable alternative.

Fast-curing protective coating for use in steel and concrete potable water storage facilities. Contact your Tnemec representative for other systems and additional information on potential uses.

An advanced generation, 100% solids epoxy liner for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion and chemical contact. For..

This product has been discontinued. Please refer to Series 115 Uni-Bond DF for a suitable alternative.

An advanced generation, low odor, high solids, water-based epoxy coating for protection and finishing of steel and concrete. For use on the interior and exterior of tanks, pipes and equipment...

This product has been discontinued. Please refer to Series 1029 Enduratone for a suitable alternative.

A one component, self-crosslinking finish coat formulated for use on structural steel, tanks, towers, pipes and similar structures. Formulated to resist mildew growth on the paint film. Note:..

Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications where..

All thinners are classified under Series 41. Product datasheets are not available for thinner products. MSDS available. For further thinning instructions, please refer to the product the thinner..

A disappearing colorant (patent pending) to aid in the uniform application of the clear coat. Adding Series 44-500 Skip-Saf to Series 76 and Series 1076 will temporarily provide a color..

Special additive for use with Series N68, N69 and N140 to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C).

An additive package to promote the adhesion and corrosion protection of Series 35 and 115 to selected substrates and primers.

High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and undergound conditions. Also, when a two-coat application is..

Single component, high-performance coating for filling surface voids in porous concrete and masonry block. Provides high bond strength.

Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel storage, chemcial containment and wastewater treatment.

Industry standard for epoxy coatings for over 30 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

A versatile low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact..

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact..

A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High build quality combines with project specific primers for two-coat, labor..

A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of pigmented Endura-Shield. Resists most graffiti markings. Series 44-500 (patent 5,548,010..

A unique satin urethane clear coat used to both enhance the finish and extend the long-term weathering qualities of pigmented Endura-Shield. Resists most graffiti markings.

A high-build, ceramic-like coating that provides excellent protection and easy cleaning. May be applied to both steel and concrete providing excellent resistance to abrasion, staining and many..

Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term..

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic..

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats..

A single-component, moisture-cured, zinc-rich primer for the interior and exterior of steel potable water tanks. Provides outstanding long-term corrosion resistance when used as a primer in..

High performance semi-gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors;..

Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer or intermediate coat on tanks, vessels and other industrial and..

Trowel grade filler and surfacer for concrete being finished with Tnemec Vinester coating/lining. See Series 120 data sheet for acid and chemical resistance profile and general uses.

This product has been discontinued. Please refer to Series 215 Surfacing Epoxy or 218 MortarClad for a suitable alternative.

This product has been discontinued. Please contact your local Tnemec Coatings Consultant for a suitable alternative.

Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product..

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior..

Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing..

A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent..

This product has been discontinued. Please refer to Series 141 for a suitable alternative.

Please contact your local Tnemec Coatings Consultant for more information on this product.

Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth and..

High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer.

A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as..

A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against..

This product has been discontinued. Please contact your Tnemec Coatings Consultant for a suitable alternative.

Fast-curing, aggregate reinforced material for surfacing and patching concrete substrates. Generally topcoated with a variety of high-performance epoxies for use in mild and aggressive exposures.

This product has been discontinued. Please refer to Series 218 MortarClad for a suitable alternative.

A decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and mild chemicals with an aesthetically pleasing appearance.

A multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion and mild chemicals.

A fast-cure, multi-purpose, broadcast, slurry broadcast or mortar applied floor topping system installed at 1/8” to 1/4” thickness. Protects against impact, abrasion and mild chemicals.

A highly chemical resistant, multi-purpose resin for secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.

Ultra-Tread M is a low odor mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid..

A chemically active solution used to promote the adhesion of Tnemec Elasto-Shield Series 264 or 265 to steel, non-ferrous metals, glass, fiberglass and to itself when maximum cure time has been..

Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and..

A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Stranlok’s 100% solids epoxy technology is solventless and VOC compliant, making..

A fiber-reinforced coating for protection against acids, alkalis and other aggressive chemical solutions. The dense, seamless surface can be easily cleaned with pressurized hot water.

A high gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis,..

A clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

A clear novolac finish for decorative flooring systems. It protects against harsh chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.

Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried..

Durable, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes..

Please contact your local Tnemec Coatings Consultant for more information on this product.

Low odor, fast dry, low VOC, waterborne polyurethane coating for interior wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user..

A thick-film reinforced low temperature cure modified epoxy lining formulated with resistance to a broad range of chemicals, fuels and solvents. Spray applied at 20 to 40 mils. Manufactured..

A 100% solids flexible polymer formulated for general use as a trowel grade filler/surfacer for steel and provides protection against chemical attack and environmental degradation. Resistant..

A thick-film reinforced modified epoxy internal lining formulated for corrosion control of chemical tanks and aggressive chemical immersion. Spray applied at 20 to 50 mils. Series 390 exhibits..

A thick-film reinforced modified epoxy internal lining formulated for corrosion control and abrasion resistance in milling and process environments, chemical plants and refineries. Series 396..

This product has been discontinued. Please refer to Series N140 Pota-Pox Plus or Series 201 Epoxoprime for a suitable alternative.

This aggregate reinforced, 100% solids, hybrid epoxy mortar is designed for wastewater immersion/fume environments where hydrogen sulfide gas and sulfuric acid are present.

A thick film, 100% solids, spray-applied, abrasion-resistant coating designed for wastewater immersion and fume environments. Provides excellent resistance to H₂S gas permeation, protects..

Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum..

Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta,..

Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all Vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta,..

Phylon WB is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, gloss sheen. Phylon WB can also be used for most painted concrete..

Conformal Clear is a penetrating, solvent-based masonry coating for virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry...

Series 626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of unwanted graffiti. This product is intended for use in conjunction with Series 680..

Concrete, stone and masonry treated with diluted Prime-A-Pell H₂O Concentrate resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Concrete, stone and masonry treated with Dur A Pell 20 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Concrete, stone and masonry treated with Prime-A-Pell Plus resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. Series V662 conforms with..

Concrete, stone and masonry treated with Dur A Pell 100 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

Concrete, stone and masonry treated with Deck A Pell 40 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term..

An advanced technology polyurethane finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention for long-term aesthetics on a wide range of exterior..

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over..

A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and spray application. It has outstanding color and gloss retention even in the most..

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems...

An exterior clear fluoropolymer finish coat especially designed to enhance the exterior weatherability of Fluoronar and HydroFlon. Fluoronar Clear has outstanding resistance to ultra-violet..

A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish with user friendly application. It has outstanding color and gloss retention even in the most..

A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for exterior applications to steel, concrete and other miscellaneous substrates. It..